|
1:
|
<NW_UNISYS messages>
|
|
|
DESCRIPTION
|
General message to log NW_UNISYS messages
|
|
|
ACTION
|
Corrective action is given in the messages, otherwise contact Unisys Customer Support.
|
|
1000:ERROR
|
Tried to write more than maxlen:len=%ld, maxlen=%ld
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the transaction blob record.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1001:ERROR
|
Can't create file %s in APPDIR for storing OSITP blob
|
|
|
DESCRIPTION
|
The Transaction blob file specified could not be created in the APPDIR directory.
|
|
|
ACTION
|
Check the file privileges of the APPDIR directory.
|
|
1002:ERROR
|
Can't write to OSITP blob file %s in APPDIR
|
|
|
DESCRIPTION
|
The GWOSITP software was unable to write to the Transaction blob file specified.
|
|
|
ACTION
|
Check to make sure there is sufficient space available in the APPDIR directory.
|
|
1100:ERROR
|
Unable to retrieve Network context, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1101:ERROR
|
Unable to retrieve file descriptor, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1102:INFO
|
Unable to obtain svc (%s) info from shared memory, request rejected!
|
|
|
DESCRIPTION
|
The requested remote service could not be found in Domain remote service section of shared memory.
|
|
|
ACTION
|
Use dmunloadcf command to verify that the remote service specified is defined in the current configuration. If this service is not shown to exists in the current configuration, add it to the DM_REMOTE_SERVICES section of the domain configuration file, shutdown the gateway, rerun dmloadcf, and reboot the OSITP gateway process.
|
|
1103:ERROR
|
Find network transaction failed, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1104:ERROR
|
Can not create Network Context, request rejected!
|
|
|
DESCRIPTION
|
A network context structure could not be created for the current tpcall. It is possible that the necessary memory could not be allocated.
|
|
|
ACTION
|
Adjust system parameters to allow more memory and restart the OSITP Gateway process.
|
|
1105:ERROR
|
Could not retrieve Network context, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1106:ERROR
|
Unable to obtain remote domain info from shared memory
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1108:WARN
|
Transaction table full, request rejected!
|
|
|
DESCRIPTION
|
The number of current transaction exceeds the number allocated to this gateway as defined by the domain configuration parameter MAXTRAN or the total number of transaction allocated as defined by the TUXCONFIG parameter MAXGTT.
|
|
|
ACTION
|
Increase the appropriate Transaction parameter and restart the OSITP Gateway process and domain if necessary.
|
|
1110:ERROR
|
Unable to set nettxid in shmem
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1111:ERROR
|
Cannot associate with network transaction
|
|
|
DESCRIPTION
|
An attempt to start this transaction failed either because this transaction is shown to have already completed or was aborted.
|
|
|
ACTION
|
No action is necessary.
|
|
1115:ERROR
|
Could not find RDOM %s cache entry
|
|
|
DESCRIPTION
|
The specified Remote domain should have already been placed in Cache. Either the rdom name or the cache memory has been corrupted.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1117:ERROR
|
Cannot set remote domain for transaction
|
|
|
DESCRIPTION
|
The Maximum number of remote domains for a given transaction has been exceeded.
|
|
|
ACTION
|
Increase the MAXRDOM parameter in the domain configuration file, rerun dmloadcf, and restart the OSITP Gateway, or reduce the number of remote domains involved in a single transaction.
|
|
1118:INFO
|
Resumed with BLOCKING timeout
|
|
|
DESCRIPTION
|
A blocking timeout has occurred on a request to a remote host.
|
|
|
ACTION
|
Examine the ULOG for more information concerning the reason for the failure. Check configuration and increase the BLOCKTIME value, if needed.
|
|
1121:ERROR
|
Bad action state
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1122:ERROR
|
Couldn't retrieve TRAN table from shmem, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1123:ERROR
|
Unable to obtain local tdomain address from shmem
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the action.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1124:ERROR
|
Unable to get remote service information from shared memory
|
|
|
DESCRIPTION
|
The remote service name specified was not found in the DM_REMOTE_SERVICES shared memory tables.
|
|
|
ACTION
|
Check the domain configuration file DM_REMOTE_SERVICES section and verify that the Remote service specified has been defined. If not defined, correct the and restart any necessary processes.
|
|
1125:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpcall was received and the dialog was not in the FREE state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1126:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpconnect was received and the dialog was not in the FREE state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1127:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpsend was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1128:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpsend was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1129:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A Network reply was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1130:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A Network failure was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1131:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A Network tpcall was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1132:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A Network tpconnect was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1133:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A Network tpsend was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1134:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A MSG reply was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1135:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A MSG tpdisconnect was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1136:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A MSG failure was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1137:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpconnect confirm was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1138:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
A tpconnect fail was received and the dialog was not in a valid state. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1139:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1140:ERROR
|
Protocol error, DiaFSM state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An invalid dialog state was encountered. An internal processing error has occurred while processing a transaction.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1141:ERROR
|
Internal error, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred while processing this action.
|
|
|
ACTION
|
Look for prior Userlog messages for more information. Contact Unisys Customer Support.
|
|
1142:WARN
|
Can't find input message buffer, ACALL event deleted!
|
|
|
DESCRIPTION
|
A reply was received for an ACALL event which has been deleted and no longer exists.
|
|
|
ACTION
|
No action is necessary.
|
|
1143:ERROR
|
More than one tpcall to AUTOPREPARE svc (%s) attempted, request rejected
|
|
|
DESCRIPTION
|
An attempt to make more than one tpcall within a transaction to an AUTOPREPARE service was attempted. This tpcall was rejected.
|
|
|
ACTION
|
Modify the client code or remove the AUTOPREPARE setting on the Service.
|
|
1250:ERROR
|
copy_local_service: Memory error on Local Service
|
|
|
DESCRIPTION
|
An internal error has been detected while copying a Local Service.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1251:ERROR
|
copy_remote_domain: Memory error
|
|
|
DESCRIPTION
|
An internal error has been detected while copying a Remote Domain.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1252:ERROR
|
copy_remote_service: Memory error on remote Service
|
|
|
DESCRIPTION
|
An internal error has been detected while copying a Remote Service.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1253:ERROR
|
gwnwUtility_getLocalConfig: Memory error
|
|
|
DESCRIPTION
|
An internal error has been detected while getting the local configuration.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1254:ERROR
|
gwnwUtility_getLocalConfig: Error walking though LDOM list
|
|
|
DESCRIPTION
|
An internal error has been detected while walking the LDOM list.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1255:ERROR
|
read_cfg_in_file: Error allocating receive buffer
|
|
|
DESCRIPTION
|
An internal error has been detected while allocating the receive buffer.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1256:WARNING
|
read_cfg_in_file: Can't send request to service DMADM. Tperrno = %d
|
|
|
DESCRIPTION
|
The gateway has attempted to call the DMADM server to obtain the OSITP configuration information. The DMADM server did not respond.
|
|
|
ACTION
|
If running in a Multiple Machine (MP) configuration the DMADM service is required. In this case you need to modify the ubbconfig file and add DMADM as a service. See OSI-TP Uses guide for help. Reprocess the file with tmloadcf. Then rerun tmboot. If running in the single machine (SHM) configuration the DMADM service is not needed and and this message can be ignored.
|
|
1257:ERROR
|
read_cfg_in_file: Bad version # of BDMCONFIG file
|
|
|
DESCRIPTION
|
The binary file "BDMCONFIG" contains an internal version number which is incompatible with this version of OSITP.
|
|
|
ACTION
|
Reprocess your DMCONFIG file with dmloadcf to create a new binary "BDMCONFIG" file.
|
|
1258:ERROR
|
read_cfg_in_file: Memory error on local domains
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the local domains.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1259:ERROR
|
read_cfg_in_file: Memory error on Remote domains
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the remote domains.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1260:ERROR
|
Unable to allocate memory for Remote domains
|
|
|
DESCRIPTION
|
An internal error has been detected while processing the remote domains.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1261:ERROR
|
read_cfg_in_file: Memory error on Local services
|
|
|
DESCRIPTION
|
An internal error has been detected while processing Local Services.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1262:ERROR
|
read_cfg_in_file: Memory error on Remote services
|
|
|
DESCRIPTION
|
An internal error has been detected while processing Remote Services.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1263:ERROR
|
read_cfg_in_file: fopen error on input file %s
|
|
|
DESCRIPTION
|
Error opening input file.
|
|
|
ACTION
|
Verify file exists and is accessible by you.
|
|
1264:ERROR
|
read_cfg_in_file: Read error on # of Version number.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1265:ERROR
|
Encode of AE Title (%s) failed for RDOM (%s)
|
|
|
DESCRIPTION
|
An error occured while encoding the AE Title for the indicated remote domain.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1266:ERROR
|
read_cfg_in_file: Read error on # of Local domains.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1267:ERROR
|
Encode of AE Title (%s) failed for LDOM (%s)
|
|
|
DESCRIPTION
|
An error occured while encoding the AE Title for the indicated local domain.
|
|
|
ACTION
|
Check the definition of the AE Title for this local domain in the dmconfig file and correct. Shutdown the Gateway, rerun dmloadcf and reboot the Gateway process.
|
|
1268:ERROR
|
read_cfg_in_file: Read error on local domains
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1269:ERROR
|
read_cfg_in_file: Read error on # of Remote domains.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1271:ERROR
|
read_cfg_in_file: Read error on Remote domains.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1273:ERROR
|
read_cfg_in_file: Read error on # of Local services.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1275:ERROR
|
read_cfg_in_file: Read error on Local Services.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1276:ERROR
|
read_cfg_in_file: Read error on # of Remote services.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1278:ERROR
|
read_cfg_in_file: Read error on Remote Services.
|
|
|
DESCRIPTION
|
Error processing binary configuration file.
|
|
|
ACTION
|
Reprocess dmconfig text file with dmloadcf.
|
|
1279:ERROR
|
BDMCONFIG environment variable is not set.
|
|
|
DESCRIPTION
|
The environment variable BDMCONFIG is not set.
|
|
|
ACTION
|
Set the environment variable BDMCONFIG to the fully qualified name of the BDMCONFIG file.
|
|
1325:ERROR
|
ioptr_init_char failed
|
|
|
DESCRIPTION
|
An internal error occurred; gw_nw_buf_encode failed to initialize ioptr structure. The vbuf for which the ioptr was to be initialized is corrupted.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1326:ERROR
|
ASN.1 ENCODE failed %s
|
|
|
DESCRIPTION
|
The Gateway process was unable to encode the typed buffer.
|
|
|
ACTION
|
Look for further errors which indicate the type and subtype of the buffer which could not be encoded. Check the encoding types and the typed buffer definitions to ensure that they are compatible. Correct any discrepancies and restart the OSITP Gateway process if necessary.
|
|
1328:ERROR
|
ASN.1 DECODE failed %s
|
|
|
DESCRIPTION
|
The Gateway process was unable to decode the typed buffer.
|
|
|
ACTION
|
Look for further errors which indicate the type and subtype of the buffer which could not be decoded. Check the encoding types and the typed buffer definitions to ensure that they are compatible. Correct any discrepancies and restart the OSITP Gateway process if necessary.
|
|
1329:ERROR
|
tpalloc failed: %s
|
|
|
DESCRIPTION
|
An Internal error has occurred while trying to perform a tpalloc.
|
|
|
ACTION
|
Increase the system parameters to allow more memory per process and restart the OSITP gateway process.
|
|
1341:ERROR
|
Unable to process typed buffer, type=%s subtype=%s
|
|
|
DESCRIPTION
|
The Gateway process was unable to convert the specified buffer to an ASN.1 encoded buffer.
|
|
|
ACTION
|
Check the encoding types and the typed buffer definitions to ensure that they are compatible. If buffer conversion is being performed, check to make that the data conversion specified is valid. Correct any discrepancies and restart the OSITP Gateway process if necessary.
|
|
1347:ERROR
|
Unable to reconstruct typed buffer, type=%s subtype=%s
|
|
|
DESCRIPTION
|
The Gateway process was unable to convert an ASN1 encoded buffer tothe specified buffer.
|
|
|
ACTION
|
Check the encoding types and the typed buffer definitions to ensure that they are compatible. If buffer conversion is being performed, check to make that the data conversion specified is valid. Correct any discrepancies and restart the OSITP Gateway process if necessary.
|
|
1348:ERROR
|
INRECTYPE buffer type (%s) cannot be converted to NATIVE A SERIES buffer.
|
|
|
DESCRIPTION
|
The buffer type, specified by INRECTYPE, to be converted to a NATIVE A SERIES buffer is not a valid type for this conversion. Only buffers of type X_COMMON, X_C_TYPE, VIEW, and VIEW32 are valid.
|
|
|
ACTION
|
Check to make sure you are calling this service with the correct buffer type, or that the encoding of NATIVE_A_SERIES is correct.
|
|
1349:ERROR
|
Buffer type (%s) cannot be converted to a NATIVE A SERIES buffer.
|
|
|
DESCRIPTION
|
The buffer type to be converted to a NATIVE A SERIES buffer is not a valid type for this conversion. Only buffers of type X_COMMON, X_C_TYPE, VIEW, and VIEW32 are valid.
|
|
|
ACTION
|
Check to make sure you are calling this service with the correct buffer type or that the encoding of NATIVE_A_SERIES is correct.
|
|
1350:ERROR
|
read_cfg_in_file: fopen error on input file %s
|
|
|
DESCRIPTION
|
DMADM had a problem opening the binary configuration file, BDMCONFIG.
|
|
|
ACTION
|
Make sure the binary configuration file, BDMCONFIG, exists and is accessible to you.
|
|
1351:ERROR
|
Bad File Handle for binary file
|
|
|
DESCRIPTION
|
An internal error was detected in DMADM while trying to process the binary configuration file (BDMCONFIG).
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1352:ERROR
|
tpalloc failed in DMADM
|
|
|
DESCRIPTION
|
An internal error was detected in DMADM.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1353:ERROR
|
BDMCONFIG environment variable is not set.
|
|
|
DESCRIPTION
|
The environment variable BDMCONFIG is not set.
|
|
|
ACTION
|
Set the environment variable BDMCONFIG to the fully qualified name of the BDMCONFIG file.
|
|
1509:ERROR
|
Invalid conversation context
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1511:ERROR
|
Protocol error, msg state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1513:ERROR
|
Protocol error, msg state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1514:ERROR
|
Protocol error, dial state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1515:ERROR
|
Protocol error, node state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1517:ERROR
|
Protocol error, msg state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1518:ERROR
|
Protocol error, node state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1521:ERROR
|
Could not find transaction node, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1526:ERROR
|
Protocol error, msg state(%d), shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1530:ERROR
|
Could not find transaction node, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal error has been detected.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1601:ERROR
|
Can not create Network Context, request rejected!
|
|
|
DESCRIPTION
|
A Network Context structure could not be allocated for the requested tpconnect. There is not enough process memory available to allocate the structure necessary for processing the requested tpconnect.
|
|
|
ACTION
|
Increase system parameters to allow more process memory and restart the Gateway.
|
|
1602:ERROR
|
Could not retrieve Network context, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1603:ERROR
|
Could not retrieve Network context, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support
|
|
1604:INFO
|
Unable to obtain svc (%s)info from shared memory, request rejected!
|
|
|
DESCRIPTION
|
The service requested could not be found in the shared memory DM_REMOTE_SERVICES section. The shared memory has been corrupted.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1605:WARN
|
Transaction table full, request rejected!
|
|
|
DESCRIPTION
|
The number of outstanding Transactions has exceeded the Maximum number allowed as defined by the Local Domains MAXTRAN or the Machines definition MAXGTT.
|
|
|
ACTION
|
Increase either the MAXTRAN or MAXGTT configuration parameter and restart the Gateway.
|
|
1606:WARN
|
Unable to create gwnwClientAgent, request rejected!
|
|
|
DESCRIPTION
|
There is not enough process memory available to allocate the structure necessary for processing the requested tpconnect.
|
|
|
ACTION
|
Increase system parameters to allow more process memory and restart the Gateway.
|
|
1607:ERROR
|
Unable to obtain remote domain info from shared memory
|
|
|
DESCRIPTION
|
The remote domain could not be found in the shared memory DM_REMOTE_DOMAINS section. The shared memory has been corrupted.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1608:ERROR
|
Conversation identifier is invalid
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1609:ERROR
|
Couldn't retrieve TRAN table from shmem
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1610:ERROR
|
Unable to set nettxid in shmem
|
|
|
DESCRIPTION
|
An attempt to set the network transaction id in shared memory failed. This could indicate that the shared memory tables have been corrupted.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1611:ERROR
|
Cannot associate with network transaction
|
|
|
DESCRIPTION
|
An attempt to start this transaction failed either because this transaction is shown to have already completed or was aborted.
|
|
|
ACTION
|
No action is necessary.
|
|
1612:ERROR
|
Cannot set remote domain for transaction
|
|
|
DESCRIPTION
|
An attempt to set the remote domain for this transaction failed.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1613:ERROR
|
Invalid action index
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1614:ERROR
|
Invalid incoming conversation context
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1615:ERROR
|
Conversation identifier is NULL
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1616:ERROR
|
Invalid action index
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1617:ERROR
|
Invalid conversation context
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1619:INFO
|
Resumed with blocking timeout
|
|
|
DESCRIPTION
|
This conversation incurred a blocking timeout and will be aborted.
|
|
|
ACTION
|
Examine the ULOG for more information concerning the reason for the failure. Check configuration and increase the BLOCKTIME value, if needed.
|
|
1620:ERROR
|
Bad action state
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Software Support.
|
|
1621:ERROR
|
Could not find RDOM %s cache entry
|
|
|
DESCRIPTION
|
The remote domain id specified for this service could not be found in the remote domain cache. This could indicate that the configuration file is incorrect or that there has been corruption of the remote domain cache.
|
|
|
ACTION
|
Check the domain configuration file and make sure that the remote domain specified is defined in the file correctly. If in error, correct the error, shutdown the gateway, reload the configuration file, and restart the gateway.
|
|
1622:ERROR
|
Invalid outgoing conversation context
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Software Support.
|
|
1705:INFO
|
Found transaction without log record
|
|
|
DESCRIPTION
|
A previous transaction was found, however a log record for this transaction did not exist. This transaction will be rolled back.
|
|
|
ACTION
|
No Action necessary.
|
|
1706:ERROR
|
Create transaction node failed, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1714:WARN
|
log record refused
|
|
|
DESCRIPTION
|
The transaction log record could not be recovered. The transaction will be rolled back.
|
|
|
ACTION
|
No action is necessary.
|
|
1717:ERROR
|
Unable to create action to handle restarted transaction!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1725:ERROR
|
Create transaction node failed, shutdown Gateway!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1726:ERROR
|
Unable to create action to handle restarted transaction!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1728:ERROR
|
Unable to create action to handle restarted transaction!
|
|
|
DESCRIPTION
|
An internal processing error has occurred.
|
|
|
ACTION
|
Contact Unisys Customer Support.
|
|
1752:ERROR
|
Can't find view file, %s
|
|
|
DESCRIPTION
|
The specified view file could not be found.
|
|
|
ACTION
|
Check to make sure that the view file exists and the VIEWFILES or VIEWFILES32 environment variables contain the specified view file name. Also check to make sure that the view file is located in the directory specified by the VIEWDIR or VIEWDIR32 environment variable.
|
|
1753:ERROR
|
APDU buffer overflow
|
|
|
DESCRIPTION
|
The APDU buffer allocated was not large enough to hold the data contained in the view buffer.
|
|
|
