|
|
|
|
|
|
Error Messages
The following messages are logged to the USERLOG file from an eAM gateway (GWSNAX) and the Communications Resource Manager (CRM).
|
1118:INFO |
A BLOCKING timeout has occurred on an outbound request |
|
|
|
DESCRIPTION |
A blocking time out has occurred on a request to the host. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. Check configuration and increase the BLOCKTIME value, if needed. |
|
1121:ERROR |
Bad action state |
|
|
|
DESCRIPTION |
An internal error has been detected processing the action. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1122:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_acall has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1600:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_connect has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1602:ERROR |
Cannot open SNA connection |
|
|
|
DESCRIPTION |
Unable to allocate a network context. gw_nw_AllocNwCtx failed. |
|
|
ACTION |
See previously printed ULOG message for cause. |
|
1604:ERROR |
Initialization of environment failed |
|
|
|
DESCRIPTION |
Unable to initialize the conversation environment. |
|
|
ACTION |
See previously printed ULOG message for cause. |
|
1621:ERROR |
Bad action state |
|
|
|
DESCRIPTION |
An internal error has been detected processing the action. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1622:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_convsend has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1625:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_disconnect has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1630:ERROR |
Unable to send data on sna_conv_idx %d |
|
|
|
DESCRIPTION |
A network error has occurred while processing a send to the CRM. gw_nw_convsend failed. |
|
|
ACTION |
Determine if CRM is still active. Look for other ULOG messages that specify a reason for this failure. |
|
1989:ERROR |
External encode/decode service returned error: \n\tTUXEDO code (%d) %s |
|
|
|
DESCRIPTION |
A Tuxedo error has occurred in the Data Integration portion of the product. |
|
|
ACTION |
Use the Tuxedo error to resolve the Data Integration problem. If unable to resolve the problem, contact BEA Customer Support. |
|
1990:ERROR |
Cannot create external decode action! |
|
|
|
DESCRIPTION |
An internal error has occurred in the Data Integration portion of the product. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1991:ERROR |
Cannot create external encode action! |
|
|
|
DESCRIPTION |
An internal error has occurred in the Data Integration portion of the product. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1992:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_decode has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1993:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_encode has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1994:ERROR |
Context data incorrect - null context index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_decode has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
1995:ERROR |
Context data incorrect - null context index |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_encode has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2200:ERROR |
Cannot malloc sna structures |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2203:ERROR |
Cannot malloc remote domain structure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2204:ERROR |
Cannot malloc local SNA structure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2205:ERROR |
Unable to obtain local snadom information from shmem |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2206:ERROR |
Cannot malloc remote service structure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2207:ERROR |
Cannot malloc remote SNA structure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2210:ERROR |
Can't create listener for this GATEWAY |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to create a listener. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2211:WARNING |
NO SNA conversations waiting for startup |
|
|
|
DESCRIPTION |
No conversations are waiting at startup. |
|
|
ACTION |
No action needs to be taken. |
|
2214:ERROR |
Unable to set APPC_GATEWAY environment variable |
|
|
|
DESCRIPTION |
An internal error has been detected, _gp_get_nodename failed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2220:ERROR |
Memory Allocation Failure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2221:ERROR |
Memory Allocation Failure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2222:ERROR |
Memory Allocation Failure for RDOM table |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2223:ERROR |
Memory Allocation Failure for SNALINK table |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2224:ERROR |
Memory Allocation Failure for SNACRM table |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2225:ERROR |
Memory Allocation Failure for SNASTACK table |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2226:ERROR |
Unable to access SNALINK information from memory |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2227:ERROR |
Unable to access SNACRM information from memory |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2228:ERROR |
Unable to convert SNACRM network address for %s |
|
|
|
DESCRIPTION |
An error has occurred while trying to contact the SNACRM during startup. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. Probably due to a configuration problem. |
|
2229:ERROR |
Unable to access SNASTACK information from memory |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2230:ERROR |
Unable to build internal network tables |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_build_nwtbls failed. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. Probably due to a configuration problem. |
|
2231:ERROR |
Unable to connect to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while trying to contact the CRM during startup. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. Possible reasons are:
|
|
2232:ERROR |
Unable to SIGNON to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while signing on to the CRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2233:ERROR |
Unable to send STACK %s configuration to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while sending the stack configuration to the CRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2234:ERROR |
Unable to send SNALINK %s configuration to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while sending the link configuration to the CRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2235:ERROR |
Unable to send START message to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while sending the START command to the SNACRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2236:ERROR |
Unable to send SHUTDOWN message to SNACRM %s |
|
|
|
DESCRIPTION |
An error has occurred while sending the SHUTDOWN command to the SNACRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2237:ERROR |
STATE ERROR occurred during initialization, SHUTTING DOWN |
|
|
|
DESCRIPTION |
An internal state error has occurred start up. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2238:ERROR |
Unknown message type received from SNACRM during initialization |
|
|
|
DESCRIPTION |
An unknown message has been received from SNACRM. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2239:ERROR |
GATEWAY FAILS to complete connection to the SNACRM during initialization |
|
|
|
DESCRIPTION |
Connection to SNACRM is incomplete. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2240:ERROR |
Unable to send SHUTDOWN message to SNACRM %s |
|
|
|
DESCRIPTION |
eAM gateway is unable to send the SHUTDOWN command to SNACRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. The SNACRM process has probably already terminated. |
|
2241:ERROR |
Unable to access codepage table [%s], reason=%s (%d) |
|
|
|
DESCRIPTION |
eAM gateway is unable to find the file for the listed codepage for the reason specified. If reason is "Error 0", the (%d) value is the return code from the codepage read routine. 2 - Can't read from file 3 - Can't allocate memory 4 - Null/invalid pointer 5 - Invalid parameter 10 - Syntax error 11 - Unsupported format version 12 - Unsupported item |
|
|
ACTION |
Examine the DMCONFIG to determine if the CODEPAGE for a remote domain is specified incorrectly. Correct and retry. |
|
2302:ERROR |
Unable to complete initialization with SNACRM |
|
|
|
DESCRIPTION |
Connection to SNACRM is incomplete. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2509:ERROR |
Unable to obtain new convid id for this request |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_getnxt_cd has returned a failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2561:ERROR |
Action data incorrect - null action index |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_recv. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2601:ERROR |
Unable to send data on sna_conv_idx %d |
|
|
|
DESCRIPTION |
An error has occurred while sending reply data (gw_nw_reply) to the SNACRM. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2800:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_clr_convid. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2801:ERROR |
Invalid conversation id |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_clr_convid. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2802:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_getnxt_cd. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2805:ERROR |
Unable to obtain remote domain info from shared memory |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init_env was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2806:ERROR |
Unable to obtain snadom info from rdom |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_init_env was unable to get needed information from shared memory. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2808:ERROR |
Cannot realloc sna structures |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_AllocNwCtx was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2816:ERROR |
Memory allocation failure |
|
|
|
DESCRIPTION |
An internal error has been detected, gw_nw_empty_sndbuf was unable to allocate memory needed. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2847:ERROR |
SECURITY: Unable to get remote username from shared memory using local principal name %s |
|
|
|
DESCRIPTION |
A security error has occurred, the user is not authorized to access the remote host. |
|
|
ACTION |
Contact your local security administrator. |
|
2848:ERROR |
SECURITY: Unable to get local principal name from shared memory using appkey |
|
|
|
DESCRIPTION |
A security error has occurred, the user is not authorized to access the remote host. |
|
|
ACTION |
Contact your local security administrator. |
|
2849:ERROR |
SECURITY: Unable to extract password from shared memory |
|
|
|
DESCRIPTION |
A security error has occurred, the user is not authorized to access the remote host. |
|
|
ACTION |
Contact your local security administrator. |
|
2850:ERROR |
SECURITY: Unable to get security schedule |
|
|
|
DESCRIPTION |
A security error has occurred, the user is not authorized to access the remote host. |
|
|
ACTION |
Contact your local security administrator. |
|
2853:ERROR |
Invalid action index |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_mk_error. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2854:ERROR |
Context data incorrect - null context index for action %d |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_mk_error. |
|
|
ACTION |
Contact BEA Customer Support. |
|
2860:ERROR |
SECURITY: Unable to get remote user from shared memory |
|
|
|
DESCRIPTION |
A security error has occurred, the remote user is not authorized to access the local Tuxedo host. |
|
|
ACTION |
Contact your local security administrator. |
|
2935:ERROR |
Too many unrecoverable errors occurred - deleting action |
|
|
|
DESCRIPTION |
An error has occurred in gw_nw_mk_error. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
2938:ERROR |
SECURITY: Unable to get appkey for this outbound request |
|
|
|
DESCRIPTION |
A security error has occurred, the user is not authorized to access the remote host. |
|
|
ACTION |
Contact your local security administrator. |
|
2939:ERROR |
Deleting the action with the invalid context, %d |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_snd failure. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3028:ERROR |
Can't find transaction node for Network TMS event! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_TranCommon. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3029:WARNING |
Shutting down GWSNAX! |
|
|
|
DESCRIPTION |
A severe error such as a protocol error or memory corruption has occurred and has already been logged. The GWSNAX process will shutdown. |
|
|
ACTION |
Examine the ULOG for more information concerning the reason for the failure. |
|
3030:ERROR |
Unknown input transactional event(%d)! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_TranCvtMsgEvt2TranEvt. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3031:ERROR |
Invalid input object pointer! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_BindStateObject. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3032:ERROR |
Invalid input object initial state! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_BindStateObject. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3033:ERROR |
Invalid input object type! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_BindStateObject. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3034:ERROR |
Invalid input state object event(%s)! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_StateObjectTestEvent. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3035:ERROR |
Event %s is not allowed for state %s! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_StateObjectTestEvent. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3036:ERROR |
Invalid object event test metric with value %d for %s! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_StateObjectTestEvent. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3037:ERROR |
Invalid input trace object pointer! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_InitEventTrace. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3038:ERROR |
Invalid input trace object pointer! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_AddEventTrace. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3039:ERROR |
Input event %d out of range %d! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_AddEventTrace. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3040:ERROR |
Invalid input trace object pointer! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_QueryEventTrace. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3041:ERROR |
Invalid input trace object pointer! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_PrintEventTrace. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3042:ERROR |
Invalid input event identification(%d)! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_EventToString. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3043:ERROR |
Memory allocation failure |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_CreateNodeTable. |
|
|
ACTION |
Contact BEA Customer Support. |
|
3044:WARNING |
Transaction table already exists! |
|
|
|
DESCRIPTION |
An attempt has been made to create the node table and it already exists. |
|
|
ACTION |
No action needs to be taken. |
|
3045:ERROR |
Invalid input parameters! |
|
|
|
DESCRIPTION |
An internal error has been detected in gw_nw_AssociateTranByTXID. |
|
|
ACTION |
Contact BEA Customer Suppor |